|
larger image
| Applications:
Single conductor crosslinked polyethylene (XLP or XLPE) Type SIS VW-1 for use at 600 Volts or less. Approved per NEC Article 384 for instrument and control wiring where wiring is required to pass the UL vertical flame test. Rated for a maximum continuous operating temperature of 90oC in wet and dry locations.
Constuction:
Solid or stranded conductor, annealed or hard, coated or uncoated copper per UL83 and ASTM requirements.
Insulated with XLP as specified and applied tightly to the conductor in a concentric manner.
Conductors are "Oil and Gas Resistent II"
The standard color is gray.
All black insulation is rated "Sunlight Resistant".
The minimum at any point shall not be less than 90% of the specified average thickness in compliance with UL 44.
Identified by surface marking indicating manufacturers identification, conductor size, voltage rating, and UL symbol, VW-1, and type designation.
Continuously spark tested at 7500 Volts DC and pass the 4 hour cold bend test at -25oC. Other electrical and mechanical tests shall be in accordance with UL 44 and UL 1581.
Standards:
ASTM B-1, B-3, B-33, B-8, and B-174 for copper conductors.
ICEA S-95-658/NEMA WC70, ICEA S-66-524/NEMA WC7 Cross Linked Polyethylene Insulated Wire&Cable, UL 44 for Thermoset Insulated Wires & Cables, Fed Spec J-C-30B.
| |
| |
| Size
AWG | | 6
| | Standard
Number
of Strands | | 133
| | Optional
Stranding | | 7 , 19
| | Insulation
Thickness
(Mils) | | 45
| | Nominal
Overall
Diameter
[Standard Strands]
(Inches) | | 0.28" / 0.30"
| | Approximate
Shipping
Weight
(Lbs./MFT) | | 115
| |
| | | |
|
|
