American Wire Group - 10 AWG 2/C - 37/C<br>SHIELDED Type FR-XLP CSPE
 Search Catalog
      GO   
 All Categories    10 AWG 2/C - 37/C
SHIELDED Type FR-XLP CSPE
AWG CODE NAME FINDER
Enter code name in the search field to the left for specific product information
All Categories > Control Cable > FR/XLP CSPE (HypalonR), 600 Volt
Shielded & Non-Shielded > 10 AWG 2/C - 37/C
SHIELDED Type FR-XLP CSPE > View Items 
    Download PDF Download PDF     Email Email This Page     Save To Favorites Save To Favorites

10 AWG 2/C - 37/C
SHIELDED Type FR-XLP CSPE
Check up to five results to perform an action.

CONTROL CABLE - TYPE XLP-CSPE SHIELDED

larger image
Applications
Control or signal cable for important circuits in industrial plants and station control cable for electric utilities where flame resistance is essential. Suitable for the operation and interconnection of protective devices; rated circuit voltage 600 volts; recommended for operation at 90 deg. C. maximum continuous conductor temperature in wet or dry locations. Cables may be installed in open air, in ducts or conduits, in tray or trough, and are suitable for direct burial. Utility grade, meets or exceeds all UL requirements.

Construction
Stranded coated copper conductors. The insulation shall be either fire retardent ethylene propylene rubber (FREP) or fire retardant cross-linked Polyethylene (FRXLPe). Method 1-Table K1 color-coded, conductors twisted with suitable fillers, helically applied copper tape shield, CSPE jacket overall, surface printed.

Standards
1) TC Type Tray Cable per Article 340 of the NEC.
2) Individual conductors pass UL Standard 44 and the VW-1 vertical flame test.
3) Individual conductors approved as Type XHHW.
4) Cables Pass IEEE-383 ribbon burner flame test.
5) Overall jacket approved as Sunlight Resistant.
6) Cables meet requirements of ICEA Pub. No. S-66-524, NEMA Pub. No. WC7, Cross-linked Polyethylene Insulated Wire and Cable.


Request InformationCompare Items   Results per Page : 
  Results 1 - 20 of 20 1 

Item #

No. of Conductors

Conductor Size AWG

Number
of
Strands

Overall Mils

Overall Diameter Inches (mm)

Weight Per 1000ft - XLP

10-502SH 2 10 7 45 0.52 190 Lbs
10-503SH 3 10 7 60 0.62 255 Lbs
10-504SH 4 10 7 60 0.68 320 Lbs
10-505SH 5 10 7 60 0.73 370 Lbs
10-506SH 6 10 7 60 0.80 440 Lbs
10-507SH 7 10 7 60 0.85 450 Lbs
10-508SH 8 10 7 80 1.05 755 Lbs
10-512SH 12 10 7 80 1.10 810 Lbs
10-514SH 14 10 7 80 1.14 920 Lbs
10-515SH 15 10 7 80 1.20 995 Lbs
10-516SH 16 10 7 80 1.24 1020 Lbs
10-518SH 18 10 7 80 1.27 1140 Lbs
10-519SH 19 10 7 80 1.27 1155 Lbs
10-520SH 20 10 7 80 1.34 1255 Lbs
10-525SH 25 10 7 80 1.48 1600 Lbs
10-527SH 27 10 7 80 1.52 1625 Lbs
10-529SH 29 10 7 80 1.54 1730 Lbs
10-531SH 31 10 7 80 1.60 1950 Lbs
10-532SH 32 10 7 80 1.63 1950 Lbs
10-537SH 37 10 7 80 1.70 2120 Lbs
  Results 1 - 20 of 20 1